Monster Vision MAX 3D, Руководство пользователя

Страница: 14 / 32

12
3
eyewear oPeration
3.1 ChARGiNG thE EyEWEAR
The Eyewear is charged using the included USB Cable which can be connected to a computers
USB port or by using a Monster iSlimCharger. Please refer to section 4.2 Power Guidelines on pg. 15
for information on accessing a power source to charge the Eyewear.
iMPORtANt: Prior to operating the Eyewear with the transmitter it is recommended that
the glasses be fully charged; please charge the glasses for 3 hrs, or until the LED indicates
full charge as stated below.
Charging Operation
• When attached to a PC the Eyewear will charge, however they will not appear as a USB device
• Eyewear will reach a full charge from a completely dead battery in 3 hrs. The LED will flash
in a slow heart beat indicating full charge
• Eyewear can be worn by charging
• Eyewear battery life is approximately 60 hrs. on a full charge, as the Eyewear is used
it may consume more power to maintain the performance of the connection to the transmitter.
Under the most adverse conditions the Eyewear battery life may be reduced to approximately
15 hrs. as a minimum.
3.2 EyEWEAR POWER BUttON OPERAtiON
The power button is located on the top of the left earpiece with a power LED located inside
of the left earpiece.
Power Button