Be
fo
re Us
e
8
Before Use
*IMPORTANT*
• Do not overfill the Boiler as excess water will be flushed out of the Boiler
before dry steam will emit.
• If re-filling the Boiler while Steamer has been in use, be sure to allow Steamer
to cool for at least 5 minutes and loosen Boiler Cap slowly to allow any
excess steam to escape before completely removing Cap. (See page 10,
“Refilling Boiler During Use” for detailed instructions.)
D. Filling Boiler with Water
WARNINGS:
•
Carefully read all instructions before removing Boiler Cap.
•
Always unplug appliance before filling the Boiler.
Follow these instructions to avoid overfilling the Boiler:
• Be sure appliance is unplugged from the electri
-
cal power outlet, and has
cooled for at least
5 minutes before filling with water.
• Make sure Handle Assembly is in the upright “off”
position. Remove Boiler Cap by turning it counter
-
clockwise.
• Pour in 600 mls of water using the
Measuring Cup and Filler Funnel provi
-
ded – fill cup to the “200 ml” marking
three times.
Be careful not to overfill the
Boiler.
Please note that excess water will be
flushed out during use if the Boiler is overfil
-
led, resulting in wet floors.
• Replace Boiler Cap by turning it clockwise.
Do not tighten Boiler Cap
too much – finger tightening is sufficient to lock the steam in the Boiler.
If using cold water, heating time is about 3-5 minutes. If using warm
water, heating time is reduced.
*IMPORTANT*
Use ordinary tap water. Distilled or demineralized water is recommended if tap
water is too hard. DO NOT add detergents, perfumes, oils, or other chemical
substances to the Boiler. The product warranty will be null and void if anything
other than water is added to the Boiler.
100 ml
200 ml
ANT
(Ma
x
100 ml
200 ml
ANTIBAK
(Max)
Содержание SC1Z1
Страница 14: ...14 Notes Notes ...
Страница 15: ...15 Notes Notes ...