6
BLUETOOTH PAIRING
Perform the following steps to pair the BT-205 headphones with your mobile device.
1.
Press and hold the Multifunction Button for about 2 seconds to turn the
headphones on. The headphones will say Power On.
2.
If the headphones have not been previously paired, they will automatically enter
Bluetooth® pairing mode, the LED Indicator will flash red and blue alternately, and
the headphones will say Pairing. If the headphones have been previously paired to
another device, press and hold the Multifunction Button for about 5 seconds to
enter Bluetooth pairing mode.
Note: The headphones will remain in Bluetooth pairing mode for about 12 seconds.
If you do not pair them within that time, press and hold the Multifunction Button
for about 5 seconds to re-enter Bluetooth pairing mode.
3.
Open the Bluetooth settings on your mobile device, then scan for nearby Bluetooth
devices.
4.
Locate and select the BT-205 entry.
5.
If prompted for a passcode, enter 0000 (four zeroes). If pairing is successful, the
headphones will say Connected and the LED Indicator will illuminate solid blue.
Note: If they are powered on within range of a previously paired mobile device, the
headphones will automatically connect to that device.
PHONE CALLS
When an incoming call is detected, the headphones will automatically pause playback to
play the ring tone. Momentary press the Multifunction Button to answer the call.
Once the call is complete, momentarily press the Multifunction Button to terminate the
call. Audio playback will automatically resume.