5
6.
/Next Track Button: Momentarily press the button to increase the volume
level. The headphones will beep when the maximum volume level is reached. Press
and hold the button for about 1.5 seconds to skip forward to the next track.
7.
Multifunction Button: Press and hold the button for about 2 seconds to turn the
headphones on or off. Momentarily press the button the pause or resume playback.
Refer to the
MULTIFUNCTION BUTTON section for full details.
8.
Volume -/Previous Track Button: Momentarily press the button to reduce the
volume level. The headphones will beep when the minimum volume level is
reached. Press and hold the button for about 1.5 seconds to skip back to the
previous track.
CHARGING
The battery in the headphones should be fully charged before first use and at least once
every three months to keep it fresh and capable of holding a full charge. When the battery
charge level is low, the headphones will beep and the LED Indicator will illuminate red. If
the charge level gets too low, the headphone will beep and say Power Off, then
automatically turn off.
1.
If the headphones are powered on, press and hold the Multifunction Button for
about 2 seconds to turn them off. The LED Indicator will turn off and the
headphones will say Power Off.
2.
Plug one end of the included Micro USB cable into the Micro USB Port on the
headphones, then plug the other end into a USB power source (not included). The
LED Indicator will illuminate red while charging is in progress.
3.
Once charging is complete, the LED Indicator will turn off. A full charge can take up
to 2 hours to complete.
