background image

INTRODUCTION 

Thank you for purchasing this Commercial Audio 60-Watt 70V/100V Mixer Amplifier! 
This amplifier is designed to drive a conventional 4-ohm or 8-ohm speaker system as 
well as 70-volt and 100-volt constant voltage speaker systems. It features three 
unbalanced 1/4" microphone inputs, two of which can be switched to unbalanced RCA 
and 1/4" auxiliary jacks instead of microphone level inputs. 
 

FEATURES 

 

Three 1/4" microphone inputs 

 

One RCA and one 1/4" auxiliary inputs 

 

Three separate mixing/volume controls for MIC 1, MIC 2/AUX 1, and MIC 3/AUX 2 

 

Treble and bass controls 

 

MIC 1 input has priority 

 

4-ohm and 8-ohm constant resistance output options 

 

70-volt and 100-volt constant voltage output options 

 

100 ~ 240 VAC, 50/60 Hz input voltage range 

 

CUSTOMER SERVICE 

The Monoprice Customer Service department is dedicated to ensuring that your 
ordering, purchasing, and delivery experience is second to none. If you have any 
problem with your order, please give us an opportunity to make it right. You can 
contact a Monoprice Customer Service representative through the Live Chat link on our 
website www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-
Sun: 9am-6pm PT) or via email at [email protected] 
 

 

Содержание 18800

















Отзывы: