35
Q6: The model appears very 'stringy'.
A6: Check the following issues:
Ensure that the filament diameter is set to match your filament spool (1.75mm),
then try creating a new GCODE file before printing again.
Ensure that the nozzle temperature is set to the correct value for the type of
material being printed.
Q7: The print stopped during the print process.
A7: Check the following issues:
Check that the GCODE file is complete and not corrupted.
Check the original model file.
Q8: The motor does not stop at the end of the axis.
A8: Check that the stop micro switches are aligned with the motor mount and are being
activated.
Q9: The print head or bed does not move.
A9: Check the following issues:
Turn the printer off or disable the stepper motors and verify that the parts can be
moved by hand. Clear anything that is blocking the movement path.
Use the options in the Move menu to verify that the motor is turning. If the
motor turns, but the belt does not move, you need to tighten the gear motor
gear nut.
Q10: The printer is not powering on.
A10: Verify that the power cord is properly plugged into the base, is plugged into a power
outlet, and that the power outlet is live.
