Monogram ZV36SSJSS, Руководство по установке

Страница: 11 / 18

31-2000859 Rev. 0
11
STEP 1 DETERMINE HOOD, DUCTWORK AND WIRING LOCATIONS
• Use a level to draw the cooktop centerline location.
Draw the line to ceiling height.
• Measure desired distance from the bottom of the
hood to the cooking surface, 30” min. to 36” max.
NOTE: If you are installing the hood with duct
covers, be sure to read “Using Duct Cover
Accessories” page 7. Exact installation height may
be determined by use of one or more duct covers.
• Use a level to draw a straight horizontal pencil line
indicating the bottom of the hood.
‡)URPWKHOLQHLQGLFDWLQJWKHERWWRPRIWKHKRRG
measure 15-3/8” up and draw another line for the
location of the wood support. See illustration.
FOR VERTICAL (Straight Up) DUCTING:
• Use a level to draw a centerline from the bottom of the
hood to ceiling or soffit.
‡,IYHQWLQJRXWWKHFHLOLQJH[WHQGWKHFHQWHUOLQHIRUZDUG
on the ceiling or soffit.
• Locate the centerline of a 10-1/2” hole on the ceiling or
soffit by measuring 6” from the wall.
HOUSE WIRING LOCATION:
‡7KHMXQFWLRQER[LVIDVWHQHGWRWKHEDFNRIWKHKRRGRQ
the right side.
• The recessed back side of the hood provides a large
DUHDIRUWKHKRXVHZLULQJWRH[LWWKHZDOODQGEHURXWHG
WRWKHUHDUNQRFNRXWDQGMXQFWLRQER[
‡5HPRYHMXQFWLRQER[FRYHUDQGNQRFNRXW,QVWDOOVWUDLQ
relief.
Alternate Knockout Locations
,IWKHLQVWDOODWLRQUHTXLUHVWKHMXQFWLRQER[FDQEH
relocated from the back to the top of the hood. Remove
VFUHZVDOLJQER[WRWRSNQRFNRXWDQGVHFXUHZLWK
original screws.
‡5HPRYHMXQFWLRQER[FRYHUDQGNQRFNRXW,QVWDOOVWUDLQ
relief.
Installation Instructions
6-1/2"
18-1/16" for 48" Models
12-1/16" for 36" Models
9-1/16" for 30" Models
18-13/16" for 48" Models
12-13/16" for 36" Models
9-13/16" for 30" Models
Electrical
Area
8-3/8"
FOR DUCTING THROUGH REAR WALL:
• Measure 9-7/8” above the marked line for the top of
WKHKRRG$WWKHFHQWHUOLQHPDUNORFDWLRQIRUD´
diameter hole.
NOTE:
0LQLPXQFHLOLQJKHLJKWIRU5($5:$//
(;+$867ZLWKGXFWFRYHUVLV¶´ZKHQLQVWDOOLQJDW
30” above countertop using 10” elbow