•
Inbound Port –
This is the number for where specifically in the server data from the
gateway is received.
•
SNMP Community String –
This is used to support SNMPv1 protocol by giving
access to a router’s or other device’s statistics. The default will be set to “public.”
Trap Settings
Trap IP Address –
The IP Address for the SNMP Server where the trap will be sent.
Trap Port –
The server port where the trap alert state is sent when active.
MIB-II System Configuration Strings
Although it is not necessary, it is a good idea to set the contact, name, location and
description strings available at the bottom of the SNMP configuration page on the local
interface.
PAGE 18
