Monitor Audio Silver W-12, Руководство пользователя

Страница: 4 / 128

2
Spiked Foot Assembly
For Carpeted Floors
The Silver spiked foot assembly incorporates a spike for use on carpeted floors and also,
a soft polymer pad (for use on wooden or tiled floors).
Please ensure there are no hidden wires under the carpet that could be damaged
by the spikes.
The foot comes fully assembled for use
on carpeted floors. All that is required is
fixing into the bottom of the cabinet. This
is achieved by simply screwing the feet fully
into the 4-threaded insert in the underside of
the cabinet. If your carpet has a very thick
pile, remove the soft polymer pad from the
foot to ensure the spike goes right through
the carpet into the floor. With great care turn
your cabinet the right way up. Place the
cabinet in your desired location, and check
that it is level on all sides. If it is slightly
uneven, unscrew the spike at the lowest
point and check again.
Continue this process until the cabinet is fully
level. Use the locking nut on the foot to fix
the foot in place and to stop any unwanted
vibrations.
Spiked Foot Fixing For Wooden/Hard Floors
For use on solid floors or where spikes are inappropriate, it is
possible to use the foot without the spike. To use the foot in this
manner carefully grip the knurled portion of the spike and rotate anti
clockwise to unscrew the spike fully.
You may find it easier to first remove the polymer pad so as to gain
more purchase on the spike.
The pad should be replaced before carrying out the levelling operation
previously described.
Locking Nut
Main Threaded
Assembly
Spike
Polymer Pad