Moni HZBB-7887, Руководство пользователя

Страница: 13 / 17

12
Rules for safe driving
 The children must be in Safe Zones for driving:
•Not to be used on slopes or steep areas or stairs, near swimming pools or other water bodies.
•Use the toy on even ground and in safe areas only. Such as – in your home, park or playground.
•Using the product behind vehicles, near or on high traffic, streets, rivers, slopes, escalators or other dangerous places is
strictly forbidden.
•
Never use on lawns or other grass areas, on or near steep slopes.
•Avoid sandy or other hard and rough surfaces. Do not use in poor weather (snow, rain, strong wind), or at places that are
poorly lit, or places with poor visibility or with obstacles.
•Never use in the dark.Your child may encounter unexpected obstacles resulting in an accident. Use only during the day or
at places that are well lit.
 It is forbidden to shorten the terminals of the electric cables or to add other electric parts.
 Periodically check the wires, bushings and connectors.

Do not allow children to touch the wheels or be close to them, when the battery operated car is in motion.
 The product has adjustable safety belts. Instruct the children to fasten their seat belts before use in order to guarantee
their safety.
 Some accessories of the car may get damaged during improper driving, be careful.
 DO not use suddenly the forwards/backwards switch, while the car is in motion. It can be used only while the toy is
stopped in place.
 When restarting the motor there may be some sparks. It is forbidden to start the car in highly flammable and explosive
environments such as petrol stations.
 An adult must read this instruction carefully and give correct guidelines to children before playing with this product. Show
them how to start and release the pedal, how to stop the car and how to act in case of malfunctions.
 When you stop using the toy, turn off the power.
 Do not change anything in the body and parts of the product. This may lead to destabilization of the toy and injury to your
child.
 The following must be confirmed before using the product:
• Important! Before use of the product for the first time, the battery must be charged from 8 to 12 hours, but no more than 15
hours. Only an adult can charge and recharge the battery.
•Check regularly all screws, nuts and safety coverings and tighten them if necessary!
•Before each use check the seat. Whether it is correctly placed and mounted (installed) with the help of a screw.
•In order to avoid incidents, make sure that the battery operated car is entirely safe before use.
PARTS LIST AND DIAGRAM
Before you start to assemble the battery operated car, take the parts out of the packaging. Check if all parts indicated in
Figure Cd and Figure d are present. Keep the packaging until you have completely finished the assembly.
 Figure Cd: F – car body – 1 pc; Т – tires – 4 pcs; Sw – steering wheel – 1 pc; S – seat – 1 pc; Wc – wheel cover – 4 pcs;
R – rearview mirrors – 1 set; C – charger – 1 pc; N – nuts (2 pcs) and washers (2 pcs); W – windshield – 1 pc; Rc – remote
control – 1 pc;
 Figure d: W – windshield; Sw – steering wheel; S – seat; F – car body; Rw – rear wheels; Cd – car doors; R – rearview
mirrors; Fw – front wheels.
1. Step 1 – Figure 1: Connect the car cables to the battery cables.
2. Step 2 – Figure 2: Attach a gasket on each side of the front axle.
3. Step 3 – Figure 3: Place the front wheel on the front axle.
4. Step 4 – Figure 4: Attach a gasket.
5. Step 5 – Figure 5: Place a nut and tighten it using a wrench.
6. Step 6 – Figure 6: Remove from the rear axle the nuts and the gaskets.
7. Step 7 – Figure 7: Place the rear wheel on the rear axle.
8. Step 8 – Figure 8: Reattach the gasket again on the rear axle.
9. Step 9 – Figure 9: Place the nut and tighten it in order to fix the rear wheel.
10. Step 10 – Figure 10: Place a wheel cover on each wheel.
11. Step 11 – Figure 11: Connect the steering wheel’ cables to those of the car.
12. Step 12 – Figure 12: Place the steering wheel on top of the front fork. Align the openings of the steering wheel to those
of the front fork. Slide a screw trough the openings.
13. Step 13 – Figure 13: Fix the screw using a screwdriver.
14. Step 14 – Figure 14: Place the windshield on the front car body. Insert its plastic pins in the openings and press
carefully, until they are fixed. You will hear a clicking sound.
15. Step 15 – Figure 15: Insert the rearview mirrors in the openings on the side of the car doors. Press carefully until they
are fixed. You will hear a clicking sound.
ASSEMBLY STEPS