57D0016
21
LOG PLACEMENT
INSTALLING LOGS AND ROCK WOOL (EMBER MATERIAL) IN FIREBOX
1. Open front door of fi rebox.
See Page 31.
2. Carefully remove seven (7) logs from wrapping.
3. Place rear log (#1) against back of fi rebox.
See Figure 18.
4. Line up the holes in the bottom of the left base log (#2) with two (2) pins on the left side of insert. Install left base log.
See Figure 19.
Before you begin
— This unit is supplied with seven (7) ceramic fi ber logs. Do not handle these logs with your bare hands.
Always wear gloves to prevent skin irritation from ceramic fi bers.
After handling the logs, wash your hands gently with
soap and water to remove any traces of fi bers.
The positioning of the logs is critical to the safe and clean operation of this heater.
Sooting and other problems may result if the logs are not properly and fi rmly positioned
in the appliance. Never add additional logs or embellishments such as pine cones or
vermiculite to the heater. Only use the logs supplied with the unit.
Failure to position the parts in accordance with diagrams below or to use only parts
specifi cally approved for this heater may result in property damage or personal
injury.
W
ARNING
Figure 18 - Installing Rear Log #1
Figure 19 - Installing Left Log #2
Rear Log (#1)
Left Front Log (#2)
Pins
