Monark energy 736, Инструкция по эксплуатации

Страница: 6 / 18

Tip the cycle forward. Assemble the rear support
tube with two bolts and two nuts.
Note: Use the accompanying spanner. See fig. 1.
Tip the cycle backwards. Assemble the front support
tube with two nuts onto the two fastened bolts
Note: Use the accompanying spanner. See fig 2.
The saddle post is back to front when packed and
needs rotating 180 degrees. Position the saddle facing
forwards on the saddle post. Check the saddle clip is
tight and that the saddle is at correct angle and facing
centrally. If the saddle clip is not tightened and the
saddle is central to the clip the constant pressure of
users will cause the saddle to slip and wear the saddle
clip unnecessarily.
Adjust saddle/saddle post to desired height by
loosening the saddle post bolt. To adjust the saddle
forward/backwards loosen the upper locking knob.
Note: Tighten firmly after adjustment. See fig 3.
Fig. 1
Fig. 2
Fig. 3
6
Production number