Monark energy 736, Инструкция по эксплуатации

Страница: 10 / 18

REPLACEMENT OF BRAKE BELT
Remove the rear chain guard by undoing the mounting
screw (M5x6.5mm) at the top and unclipping the white
guard holder underneath. Move the chain guard
backwards to remove it.
Remove the end cap at the top of the front forks. Slide
out the brake belt-retaining pin. Remove the braking
system from the frame to access the holding nut and
bolt. Remove the belt from the spring.
Attach the new brake belt and assamble the bike in
reverse order.
ADJUSTMENT BRAKE BELT
Screw up the tension lever so that the pointer is stan-
ding at the beginning of the scale. Adjust the brake belt
using the black adjusting clip at the front of the bike so
a slight braking effect is obtained.
Fig. 7
10