7
MONARCHWATER.CO.UK
01986 784759 [email protected]
R. EXTRA REGENERATIONS
- To start an automatic regeneration, press the left hand button
and release, the display will count down from 15 to zero. If at any time
you wish to cancel the count down, simply press
again.
- An automatic regeneration will start shortly.
S. BLENDING CONTROL- Blue/Green Stains
All our water softeners are factory set to produce water that is 100%
soft. If you require slightly blended water - recommended on Combi/
Condensing Boilers and in areas of hard water that have a green/
blue build up in the scale - open blender bypass (Pic F) by turning
clockwise on left hand side of softener control valve slightly - until
it takes 6/7 drops of the dark liquid to get a red to green colour
change, as per the original water hardness test.
NOTE: This blended water setting can only be done when the
softener is in Service.
Blending
control
valve
FURTHER INFORMATION
- Do not worry if your softener regenerates during the day. This is the Self Protect Programme
initiating an additional mini regeneration, as the softener does not have enough soft water to last
you until the next programmed regeneration of 2am.
- A regeneration can last between 51 and 92 minutes depending on the model. During this time the
softener goes into hard water bypass, ensuring a continuous supply of water.
- A Normal regeneration is programmed to 2am, a time when little, if any, water is being used.
- To change the regeneration time, simply offset the Time Setting i.e. to have the unit regenerate 2
hours later, set clock 2 hours slow - see P.
- To ensure the softeners continuous operation, please do not let the salt drop below half way down
in the cabinet.
Pic. F
