3
The
ALT FUNCTION
button toggles
ALT.
in the display. When ALT. is
displayed, the buttons will perform their secondary function listed
in the lower section of each button. It also changes how the tuning
knob works.
2.0 PREPARATION FOR USE
The strobe may be handheld or mounted on a tripod or other user supplied
bracket using the ¼-20 UNC bushing at the base of the handle.
2.1 Power
The Phaser-Strobe pbx has internal rechargeable batteries and may
also be powered by an external AC power supply (PSC-pbxU). If using
the internal batteries, the unit should be charged before use (see
section
). The actual operating time of the
stroboscope depends on the flash rate and duty cycle of operation. The
strobe can also be run continuously from the AC mains with the power
supply supplied (see section
8.3 External Power Supply/Charger
2.2 Input / Output Connections
The Phaser-Strobe pbx has input and output jacks on the left side
of the stroboscope. These can be used for external triggering or
synchronization (daisy chaining two or more strobes). These jacks
accept 1/8
"
(3.5 mm) phone plugs (input - stereo, output - mono). The
input and output are TTL compatible. (See Figures 2 and 3 for connector
connection detail.)
