5
With no external input, the output jack (
▼
pointing away from socket)
provides a TTL compatible pulse from the strobe’s internal oscillator. If
an external input is applied, the output pulse is in sync with the input
pulse. This output pulse may be used to trigger a second stroboscope
synchronously to illuminate larger areas. Many strobes can be daisy
chained. The output jack of one strobe is connected to the input jack
of the next strobe causing all the strobes to flash together and be
controlled by the first strobe in the chain. The polarity of the output
pulse can be set in the MENU options.
3.0 MENU
The strobe has a Menu which allows the user to select settings such as
number of decimal places, backlight on or off, positive or negative edge
for input and output signal, and input blanking on or off.
To enter the MENU:
1. Press the
ALT FUNCTION
button and then the
MENU
button.
2.
SETUP
and the menu option will be displayed.
3. Turn the tuning knob to cycle through the main menu options.
4.
Once the desired menu option is displayed, press the
MENU
button to
select it. Press any other button to cancel.
5. Turn the tuning knob to edit the menu option setting.
6. Press t
he
MENU
button to save your changes. Press any other button
to cancel.
7. Press any button other than MENU to exit the Main Menu.
8.
DONE
will be displayed.
Below is a list of the menu items:
DECPT
Decimal Point (none, 1 or 2)
BLITE
Backlight (Yes=On or No=Off)
INPUT
Positive (pos) or Negative (neg) Edge for Input Signal
OUTPT
Positive (pos) or Negative (neg) Edge for Output Signal
BLANK
Input Blanking (Yes=On or No=Off)
