4
Figure 2 Input Connector Detail (Stereo plug)
Signal Input
+6V Out to
Sensor
+6V Out to
Sensor
Signal Input
Common
(GND)
Common
(GND)
Common
(GND)
Common
(GND)
Pulse Output
from Strobe
Pulse Output
from Strobe
Figure 3 Output Connector Detail (Mono plug)
The optional ROS-P (Remote Optical Sensor), MT-190P (Magnetic), or
IRS-P (Infrared) sensors may also be used to trigger the unit.
NOTE: When using external sensors that are powered by the Phaser-
Strobe pbx, e.g. Remote Optical Sensor (ROS-P), the sensor must be
plugged in before the stroboscope is turned on, or the remote sensor
may not be powered up.
The input jack (
▲
pointing into socket) enables an external signal to
trigger the strobe. Inserting a plug into the input jack will automatically
put the strobe into the External Input Mode. The INPUT button can be
used to toggle between External Input Mode and Internal Mode. When
the plug is removed, the strobe will be put back into the Internal Mode.
The polarity of the input pulse can be set in the MENU options.
