MENU buon POWER buon On
-
Target Indicator Joysck Arrows
4. MODES OF OPERATION
The Nova-
Pro 100 has a single mode of operaon:
STROBE
, UNLESS the
oponal
Laser Module
is installed in the unit. This adds two addional
modes:
LASER
—uses the laser beam to trigger the stroboscope so that the
flashes may be synchronized to an external target such as a keyway in a
sha7 or a piece of reflecve tape on a fan blade.
TACH
(Tachometer) -
uses the laser to measure the speed of a rotang or
reciprocang target using reflecons from a keyway in a sha7 or a piece
of reflecve tape on a fan blade.
The mode of operaon is selected in the MODE menu.
See
secon 5.2
.
4.1
STROBE Mode
In this mode the strobe generates the flash rate set by the user. The
strobe will not flash unl the trigger is depressed. The user can set
the flash rate as follows:
4.1.1
Joysck
Pressing any buon on the joysck will cause a digit on the
display to start blinking—this is the digit that will be edited.
There is a rollover effect when the digit is changed—if
incremenng the units digit 99 will roll over to 100. If the user
does not increment or decrement a digit within 5 seconds the
edit mode will be cancelled.
9
