MENU buon POWER buon On
-
Target Indicator Joysck Arrows
Press
or
to
change the digit that
blinks
Press
or
to
increase or decrease
the value of the
blinking digit. Hold
for auto increment or
decrement
4.1.2
Doubling or Halving the Flash Rate
Press the MENU buon and the display will show the x2 and
÷2 icons. Use the le7
and right
buons on the joysck
to double or halve the flash rate. Press the POWER buon to
exit this mode.
To confirm that the strobe is flashing at the same rate that
the target is moving and that the RPM/RPS reading is
accurate, use the x2 buon unl you see a double or mulple
image, then use the ÷2 buon unl you see a single image.
This will now be the correct speed (see Figure 3).
10
Use joysck to x2 or ÷2
Press the MENU buon
