MENU buon POWER buon On
-
Target Indicator Joysck Arrows
A value of 600 will be displayed as 600, 600.0, 600.00, 600.000
depending on the setting.
Press the MENU button to enter the DECPT menu. The current value
is shown on the top line with DECPT on the lower line. The On-Target
indicator will be on for the currently selected value.
Use the arrows on the joysck to select the desired value.
Press the MENU buon followed by the Power buon to save the
decimal point seEng.
To exit without seEng the units press the Power buon.
5.4
UNITS Menu
This menu opon selects the Engineering Units used to display the
flash rate or speed. The choices are:
FPM - Flashes per Minute (Not available in TACH Mode)
FPS
- Flashes per Second (same as Hz, not available in TACH Mode)
RPM -
Revoluons per Minute
RPS
-
Revoluons per Second (same as Hz)
Press the MENU buon to enter the UNITS menu. Unit is shown on
the top line with the current engineering unit on the lower line.
The On-Target indicator will be on for the currently selected value.
Use the arrows on the joysck to select the desired value.
Press the MENU buon followed by the Power buon to save
the value.
To exit without seEng the units press the Power buon.
6. STROBE BRIGHTNESS
The strobe’s brightness depends on how wide the strobe’s flash pulse is; the
16
