12
English
system is connected to the mains . Thus, the unit
is ideally suited for mobile applications .
The jacks LINK LINE (18) can be used to inter-
connect multiple active speaker systems for sound
applications in large zones . A passive 4 Ω speaker
system can also be operated in parallel (e . g . the
model TXB-602 / SW with a matching design) .
3.1 Wireless microphones
The following wireless microphones are available
from MONACOR:
Type
Model
863.05
MHz
864.80
MHz
Hand-held wireless microphone
TXS-821HT
TXS-822HT
×
×
Pocket transmitter for
headband microphones
TXS-820HSE
TXS-822HSE
×
×
Pocket transmitter with
tie clip microphone
TXS-820LT
TXS-822LT
×
×
Pocket transmitter with
headband microphone
TXS-820SX
TXS-822SX
×
×
3.2 Conformity and approval
Herewith, MONACOR INTERNATIONAL declare
that the active speaker system TXA-622CD / SW
complies with the directive 2014 / 53 / EU . The EU
declaration of conformity is available on request
from MONACOR INTERNATIONAL .
The active speaker system is generally ap-
proved for operation in EU and EFTA countries;
it is
licence-free and requires no registration.
4 Setting into Operation
4.1 Setting up the active speaker
system
Place the active speaker system as desired or
mount it onto a PA speaker stand (e . g . PAST se-
ries from MONACOR) via the stand sleeve on its
lower side .
The unit can be operated inside its transport
bag: Unzip the zip fasteners of the flaps covering
the speakers, the connections and the operating
elements . Fold up the flaps and secure them with
hook-and-loop fasteners .
4.2 Power supply
The speaker system is supplied with power via
the integrated battery which is charged via the
internal charger .
1) For charging the battery, connect the mains
cable provided to the mains jack (28) and con-
nect the mains plug to a socket (230 V~ / 50 Hz) .
2) The LED CHARGE (16) lights up:
red = the battery is being charged
green = the charging process has been com-
pleted
The unit may be operated while its battery is
charged; however, as long as the red LED LOW
lights up, the full power is not available . To
reduce the charging time, switch off the unit
with the POWER switch (24) .
3) When the battery has been fully charged, the
LED CHARGE lights up in green . At maximum
volume, a mains-independent operating time
of up to 10 hours will be possible . A lower
volume will extend the operating time .
4) Recharge the battery when the red LED LOW
lights up .
Important!
Always disconnect the mains plug from the
socket when the battery has been fully charged
(LED CHARGE lights up in green) and the unit
is not operated; otherwise, the battery may be
damaged .
4.3 Connecting the active speaker system
Unit
Connection to jack
Microphone with XLR plug
MIC / LINE (12)
Audio units with line output,
e. g.: mixer, MP3 / CD player,
radio, microphone pream-
plifier
LINE IN (17) and
with 6.3 mm plug to
MIC / LINE (12) if no micro-
phone is connected
Active speaker system
LINE LINK (18)
If a second speaker system
TXA-622CD / SW or
TXA-602 / SW is used,
connect its input LINE IN to
the output LINE LINK of the
first speaker system.
Passive speaker system
EXTERNAL SPEAKER (26)
Содержание TXA-622CD/SW
Страница 2: ......
