8
English
Deutsch
Deutsch Seite
Français
Français Page
Italiano
Italiano Pagina
Español
Español Página
Nederlands
Nederlands Pagina
Polski
Polski Strona
Mini Stereo Amplifier
with Bluetooth Interface
These instructions are intended for users without
any specific technical knowledge . Please read
these instructions carefully prior to operation
and keep them for later reference .
All operating elements and connections de-
scribed can be found on the fold-out page 3 .
1 Overview
1
POWER indicator
blue amplifier switched on
The LED will flash when the mute
function is activated .
red
standby mode
2
LED LINE IN: will light up when the input
LINE IN (8) has been selected
3
LED BLUETOOTH: will light up when the
Bluetooth mode has been selected
flashes = no Bluetooth connection
lights up constantly = connection to the
Bluetooth source has been established
4
IR sensor for remote control signals
5
Control knob with two functions:
– to switch between the Bluetooth mode
(LED BLUETOOTH will light up) and the
line input (LED LINE IN will light up), press
the knob
– to adjust the volume, turn the knob
6
NFC section for fast establishment of a Blue-
tooth connection
☞
chapter 6 .1 .1
7
Bluetooth antenna
8
Stereo input (RCA jacks) to connect an audio
source with line output level (e . g . CD player)
9
Stereo output (3 .5 mm jack) to route the
audio signal to a unit with line input (e . g .
active subwoofer)
10
Speaker connection terminals (screw termi-
nals with 4 mm banana jacks)
11
Low voltage jack to connect the power sup-
ply unit provided
12
POWER switch
1.1 Remote control (fig. 2)
Button Function
to switch between:
amplifier switched on
in standby mode
to switch to the input LINE IN (8)
to switch to the Bluetooth mode
to increase the volume
to reduce the volume
to mute / unmute the sound
to operate the Bluetooth source:
to go to the beginning of the title;
to go to the previous title with each
additional press of the button
to switch between pause mode and
replay mode
to go to the next title
2 Safety Notes
The unit (including power supply unit and re-
mote control) corresponds to all relevant direc-
tives of the EU and is therefore marked with .
WARNING
The power supply unit uses dan-
gerous mains voltage . Leave ser-
vicing to skilled personnel only .
Inexpert handling may result in
electric shock .
•
The unit is suitable for indoor use only . Protect
it against dripping water, splash water and
high air humidity . The admissible ambient
temperature range is 0 – 40 °C .
•
Do not place any vessel filled with liquid on
the unit, e . g . a drinking glass .
•
Immediately disconnect the power supply unit
from the socket
1 . if the amplifier, the power supply unit or
the mains cable is visibly damaged,
2 . if a defect might have occurred after the
unit was dropped or suffered a similar ac-
cident,
English
English Page
