14
English
4.2.2 Bluetooth receiver
Wireless connection of the integrated Bluetooth
receiver to the audio source is supported to re-
play music from a Bluetooth audio source (e . g .
smartphone or tablet computer) via the amplifier .
1
3
2
1
Replay status: replay / pause
2
Current sound preset
3
Connection status:
BT NOT LINK = no connection
BT LINK OK = connection exists
When the connection has not been established
yet, “BT NOT LINK” will be shown . To establish
the connection in the operating mode “Blue-
tooth receiver”:
1) Activate the Bluetooth function at the Blue-
tooth source . On the list of available devices,
the amplifier will appear as “Monacor” .
2) When prompted for the PIN number, enter
1234 .
3) Pair the Bluetooth source with the amplifier
(see manual of the Bluetooth source, if re-
quired) . The devices will be connected auto-
matically .
Operation can be made at the Bluetooth source,
via the buttons on the module or by means of
the remote control .
Remote control
Function
Module
PLAY
II
×
× to pause / to continue replay
PRE / NEXT
I
/
I
×
× previous / next title
The volume of the Bluetooth replay depends on
the settings made at the Bluetooth source and
the music module .
4.2.3 Digital radio DAB/ DAB+
1
3
2
1
Strength of signal received
2
Station name
3
Information about programme and station
When the operating mode Digital radio receiver
(DAB/ DAB+) is used for the first time, start the
automatic station scan first . During the scan,
“Scanning . .” and the number of stations already
found will be shown . After the scan, the stations
found can be selected .
Repeat the scan when there is a change
in the local stations offered, when you have
changed your location or when the antenna or
its alignment have been modified .
Remote control
Function
Module
RPT/SCAN
SCN (U/SD)
×
×
to start automatic station scan
„Scanning..“
PRE / NEXT
I
/
I
×
×
previous / next station
„Select station“
FOLDER
×
to switch between the information
shown (3):
programme information
channel and frequency
transmission standard
stereo / mono
time and date
strength and quality of signal received
