Monaco CAYMAN 2007, Руководство пользователя

Страница: 146 / 226

ELECTRICAL SYSTEMS-HOUSE - 8
142
CAYMAN 2007
CAUTION:
Avoid flash damage to the electrical
system contacts. Before plugging the
motorhome into shore power, starting
the generator or using the inverter,
make sure all the appliances are off.
WARNING:
Keep fingers away from metal contacts
of the shore plug end. DO NOT stand
in water when making electrical
connections. Serious electrical shock
and personal injury can occur. To avoid
the risk of electrical shock, turn the
circuit breaker off at the power supply
outlet before making the shore power
connection.
CAUTION:
DO NOT remove cover from shore
power supply to troubleshoot electricity
to the motorhome. Serious personal
injury or death may occur. If there is
no power to the motorhome inform the
park manager. It is the park manager’s
responsibility to fix problems with the
shore power pedestal.
Plugging in the Shore Cord:
Located in the roadside compartment is
the shore power cord.
Unscrew the deck plate and insert the
end of the shore cable through the deck
plate.
If 50 Amp service is not available, install
the proper electrical adapter(s) to the
opposite end of the cord.



Always turn off the shore power breaker
to the power supply outlet before
connecting or disconnecting the shore
cord. This will prevent an accidental
shock and fl ashing of electrical contacts.
Make the connection to the outlet and
turn the shore power breaker on. The
transfer switch should make an audible
click.
When Hooked to 50 Amp:
After verifying proper voltage, wait
approximately one minute for the inverter
(optional) to stabilize charging of the batteries
before starting air conditioners or other large AC
loads.
When Hooked to 30 Amp:
Wait approximately one hour before operating
electric appliances. This will allow time for
the inverter (optional) to stabilize charging
the batteries. Use caution when operating
appliances to avoid overloading the supplied
shore service breaker. Operate appliances and
outlets in sequence rather than all at the same
time.
Disconnecting the Shore Cord:
Turn OFF all AC appliances.
Turn OFF the shore power breaker.
This will prevent accidental shock and
fl ashing of electrical contacts when
disconnecting.
Grasp electrical cord housing. Work
cord out and away from socket without
touching electrical contacts.
Straighten and clean cord.
Stow in Compartment.







NOTE:
No waiting period is
necessary on motorhomes
equipped with a converter.
CAUTION:
If shore power service is
limited to 15 or 20 Amps,
use of light duty extension
cords and electrical
adapters will create voltage
loss through the cord and at
each electrical connection.
Line voltage loss and the
resistance at each electrical
connection can be a
hazardous combination.
Damage to sensitive
electronic equipment may
result.
060203
060212c
060121c