14
Step 5: Remove existing doorbell and disconnect the
wiring.
-
Verify that the power to the doorbell and chime box is
still off.
Installing an Angle Bracket (OPTIONAL)
If your wall is positioned in an angle where the doorbell
will not be able to properly monitor the area you want,
then you’ll probably want to install an angle bracket.
a.
Mark the 4 corner holes
for the installation using
the angle bracket. Make sure it’s straight using
the leveler.
b.
If you have a stucco, stone, brick, or any other
hard surface,
use the drill bit (provided) and
power drill to create the 4 screw holes, then
insert the wall anchors.
If your wall is wood or another softer surface,
then you may skip this step.
c.
Align the angle bracket
with the holes and drill in
the long screws to mount the angle bracket.
