Molten Voltage™
Master Control MV-58
Owner’s Manual - p.5
© 2015 - MoltenVoltage.com - All Rights Reserved.
v 1.09
DOWN Button (D)
Pressing and releasing the DOWN Button will decrease the Program number by one. Pressing and
holding the DOWN Button will quickly decrease the Program numbers.
If the TAP Button has been pressed and released, pressing the DOWN Button will decrease the
tempo by one bpm. Pressing and holding the DOWN Button will quickly decrease the tempo.
Once the DOWN Button has been pressed, subsequent Taps will
not
affect the tempo until the 2.5
second tempo change time-out occurs, however the UP Button and SELECT Knob can still be used to
change the tempo.
UP Button (E)
Pressing and releasing the UP Button will increase the Program number by one. Pressing and
holding the UP Button will quickly increase the Program numbers.
If the TAP Button has been pressed and released, pressing the UP Button will increase the tempo
by one bpm. Pressing and holding the UP Button will quickly increase the tempo.
Once the UP Button has been pressed, subsequent Taps will not affect the tempo until the 2.5
second tempo change time-out occurs, however the DOWN Button and SELECT Knob can still be used to
change the tempo.
MIDI OUT Jack (J)
Connect Master Control to your MIDI device that will receive MIDI data by plugging a standard 5-
pin DIN MIDI cable into the MIDI OUT jack.
For best results, keep the MIDI output cable length under
fifteen (15) feet. If you need more distance, use a MIDI
repeater such as MIDI SPLITTY
The MIDI OUT Jack sends MIDI data as well as Molten Voltage self-programming messages.
SELECT Knob (H)
Turning the SELECT Knob will cause the program number to increase or decrease.
When a new program number has been selected, the Display will flash until the START Button has
been pressed and the selected program is engaged.
