Molift QuickRaiser 205, Руководство пользователя

Страница: 10 / 20

9
Molift QuickRaiser 205 / www.etac.com
Transport and operating conditions
Transport and Storage
For long time storage it is recommended that the
emergency stop button is activated (pushed in).
The lifter can be stored and transported under
temperatures between -25 - 70 °C.
Operating
The lifter is designed for use at standard room
temperatures (+5 to +40°C).
Air Pressure: 70 - 106 kPa
Relative Humidity: 15 - 93 %
Storage or transport at other temperatures leave
the lifter in a room with a suitable temperature
until it reaches a safe operating temperature.
Medical electrical equipment
requires special precautions regard-
ing electromagnetic compatibility
(EMC). Portable or mobile radio
communication equipment may
affect the medical electrical equip-
ment, and should be kept minimum
25 cm (10 inches) from the lifters
electronics.
Battery
Molift QuickRaiser 205 is available with a 24V SLA
battery and has an integrated charger. The battery
has a life expectancy of approx. 500 charge cycles.
Batteries must be disposed of as
special waste according to local
rules and regulations. Do not
dispose in general waste
Battery and Service indicator
Wrench symbol /
Service indicator
Battery symbol /
Battery indicator
The electrical system has a power-save function
which will turn off the electrical system five
minutes after last operation. All indicators will turn
off.The system is activated when pushing one of
the operating buttons
Battery indicator
When the multi level battery indicator is yellow
the lifter will have sufficient power available for
one full lifting cycle with max load. When battery
is flashing yellow it is only possible to lower the
lifting arm.
Battery indicator Battery level
Green 80% or more
Green 80 - 60%
Green 60 - 40%
Green 40 - 20%
Yellow 20% or less
(recharge lifter)
Yellow
flashing
0% (recharge lifter)
Service indicator
The lifters electronics record the weight lifted and
number of lifts. After a certain period of operation
a signal is given to indicate that service is required.
Service light Mode
No light No service needed
Yellow flashing Periodic inspection
required
Yellow Order service
Red Perform service
Electronics