Impel™ Backplane and Daughtercard Tooling
Doc. No: TM-622018899
Release Date: 02-21-14
UNCONTROLLED COPY
Page 3 of 25
Revision: A
Revision Date: 02-21-14
CAUTION
Never
perform any service or maintenance other than as described in this manual.
Never
modify, alter or misuse the equipment
Failure to observe this precaution may result in injury and property damage.
Tooling Technical Assistance
Molex offers tooling technical assistance for customers who may need some guidance for tooling adjustments. This support
can be obtained by calling either of the two numbers listed below and asking for the Molex Tooling Group.
Call Toll Free 1-800-786-6539 (US) 1-630-969-4550 (Global).
This assistance is limited to the operation and set-up of a customer’s Molex Tools tool. Questions with regard to Molex
connector products or how to identify the proper tooling and/ or tooling documentation should be directed to your local Molex
personnel or Customer Service Representative.
When calling for service on these tools it is recommended to have the following: a copy of the
Operation Manual,
the
Specific
Application Specification Sheet
and a person familiar with the tools should be present. The following information is
also recommended to supply:
1.
Customer name
2.
Customer address
3.
Person to contact such as (name, title, e-mail, and telephone number)
4.
Tools order number (Lease number also if applicable)
5.
Serial number (Lease number also if applicable)
6.
Molex Connector product order number
7.
Urgency of request
8.
Nature of problem
Molex Application Tooling Group
2200 Wellington Court
Lisle, IL 60532, USA
Tel: +1 (630) 969-4550
Fax:+1 (630) 505-0049
Visit our Web site at http://www.molex.com