
Impel™ Backplane and Daughtercard Tooling
Doc. No: TM-622018899
Release Date: 02-21-14
UNCONTROLLED COPY
Page 24 of 25
Revision: A
Revision Date: 02-21-14
GROUND SHIELD
POSITIONED IN THE
GROOVE OF THE
INSERTION TOOL
INSERTION TOOL
FLUSH WITH HOUSING
Figure 5-6
GROOVES FOR THE
GROUND SHIELD
7.
Continue pushing the ground shield until the insertion tool and the ground shield shoulder are seated securely
to the inside housing surface. See Figure 5-6.
8.
Pull the insertion tool straight up and remove. Check the final seating of the ground shield, the ground shield
shoulder should be seated flush with inside surface on housing.