Tool Kit for AviKrimp
Fully Insulated and-Insulated Quick Disconnect Flags
Doc No: ATS-6400188HM Release Date: 04-08-15
UNCONTROLLED COPY
Page 9 of 9
Revision: B
Revision Date: 06-17-15
Hand Crimp Tool
AviKrimp
Certificate of Calibration
Order No. 64001-8800
Tool Order Number
__________________
Tool Revision
___________________
Serial Number ___________________
Date of Manufacture__________________
Handle Load Range at 1 inch from the Tips =______________
Actual =_____________
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range, Conductor Nest = ____________-- Actual = ______________
Technician ______________
Date of Calibration ______________
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Visit our Web site at http://www.molex.com
