5090339 A
13
Chapter 2: Setting Up the Instrument
Before you unpack and set up the instrument, prepare a dry, flat work area that is away from
direct sunlight, dust, drafts, vibration, and moisture. The work area must have sufficient space
for the instrument, host computer, and required cables. To provide access for disconnecting
power from the instrument, maintain a 20 cm to 30 cm (7.9 in. to 11.8 in.) gap between the rear of
the instrument and the wall. To ensure sufficient ventilation, do not block the ventilation grids
on the rear of the instrument.
The package contains the instrument and the following accessories:
SoftMax Pro Software, product key, and instructions to install the SoftMax Pro Software
patch for the features that are specific to the SpectraMax Mini.
Instrument installation guide
USB computer connection cable
Power supply
Power cord
Accessory case that contains:
Hex wrench for transport lock removal
Up to four filter cubes depending on how many you purchased. (Additional filter cubes
are shipped in a separate box.)
For a complete list of the package contents, see the enclosed packing list.
Note: You must install SoftMax Pro Software version 7.1.2 or higher before you can install
the SpectraMax Mini software patch. See the
SoftMax Pro Data Acquisition and Analysis
Software Standard Edition and MiniMax Imaging Edition Installation Guide
.
Unpacking the Instrument
The package is designed to protect the instrument during shipment.
CAUTION! Do not touch or loosen screws or parts other than those specifically
designated in the instructions. Doing so could cause misalignment and possibly void the
warranty.
The instrument is packed in a specially designed carton. Before you unpack the instrument,
check the box for any damage that might have occurred during transportation. If any damage is
noted, inform the supplier immediately and keep the damaged packaging.
Note: Retain the shipping box and all packing materials for future transport needs.
2
