SkanWasher 400 User Guide
E-3
SkanWasher 400 Wash Program Sheet
Program 3
Wash programs are pre-set at the factory. These programs may be edited.
Instrument Parameters
Wash Sequence
Program Number
1
Program Name
A 2 W S A
Date
15.04.1998
Signature
HT
Description Demo program, Aspirate followed by two times wash.
Leaving the wells filled with wash buffer, soak for 5 seconds then finally an aspirate.
Aspirate probe needs to be adjusted to microplate to be used.
Air Pressure
0.25 [bar] Volume Adjust
σ
V
[-]
Aspirate Probe
0.0 [mm] Dispense Probe
2.0 [mm]
1.
Wash Step
Aspirate Wash Dispense Soak Rinse 2.0 sec/____ µl
2.
Wash Step
Aspirate Wash Dispense Soak Rinse 1.0 sec/____ µl
3.
Wash Step
Aspirate Wash Dispense Soak Rinse 2.0 sec/____ µl
4.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/ 200 µl
5.
Wash Step
Aspirate Wash Dispense Soak Rinse 5.0 sec/____ µl
6.
Wash Step
Aspirate Wash Dispense Soak Rinse 4.0 sec/____ µl
7.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
8.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
9.
Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
10. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
11. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
12. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
13. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
14. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
15. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
16. Wash Step
Aspirate Wash Dispense Soak Rinse _____ sec/____ µl
