FilterMax F3 and FilterMax F5 Multi-Mode Microplate Readers User Guide
28
5016208 D
Follow applicable decontamination procedures as instructed by your laboratory safety
officer.
Respond as required to all error messages displayed by the software.
Contact a Molecular Devices or an approved dealer for annual preventative
maintenance. Molecular Devices recommends a yearly preventive maintenance be done
on the instrument by a trained and qualified service engineer. See
Replacing Fuses
If the instrument does not seem to be getting power after switching it on, check to see
whether the supplied power cord is securely plugged into a functioning power outlet and to
the power port on the rear of the instrument.
If the power failed while the instrument was on, check that the power cord is not loose or
disconnected and that power to the power outlet is functioning properly.
If these checks fail to remedy the loss of power, replace the fuses. You can obtain
replacement fuses from Molecular Devices. For fuse specifications and part numbers, see
Physical Specifications on page 42
.
CAUTION!
Do not touch or loosen screws or parts other than those specifically
designated in the instructions. Doing so could cause misalignment and possibly void
the warranty.
The fuses are located in the fuse carrier on the rear of the instrument.
