mogk PTP 1450, Руководство пользователя

Страница: 11 / 33

11
to set the process parameters (temperature and time) perform the adjust it
using the digital control panel. Pic.3-D.
Place the protective paper on the felt (Kraft or similar role) and the material to
be worked with on the table (Pic. 2) and position the transfer with the picture
or design facing the material, move the table in the longitudinal direction to the
pressing zone, the pressing process will start, wait for the time selected in the
digital control;
Once finished the LED goes off, the display flashes and the alarm sound
indicates the end of the operation. Slide the table out of the press area and
remove the material.
Keys to Picture 3:

A
– Main Switch / Heating On / Off

B
– Safaty Enabled - Indicator

C
– Reset Button

D
– Digital Controller

E
– Press Enabled - Indicator
7.3 Speed and Pressure Control
The PTP 900 has a pressure controller located in front of the machine (pic.2) and a rise
speed regulator (pic. 2e) and lowering speed regulation (pic. 2f) of the table.
Set the pressure by turning the handle of the valve half turn at a time;
Turn the handle clockwise to increase pressure;
Turn the handle anti-clockwise to reduce the pressure;
A
Picture 3
– Control panel
B C
D
F