Moffat BLUE EVOLUTION G91, Руководство по обслуживанию

Страница: 42 / 46

B
Appendix B: Gas Conversion
40
Blue Seal Evolution Series Gas Salamander © Copyright Moffat Ltd. 9 February 2016
Amendment 9
Gas Type Labels
On completion of gas conversion, replace gas type labels located at:-
- Rear of unit, above gas connection.
- Beside rating plate.
Commissioning
Before leaving installation;
1.
Check all gas connections for leaking using soapy water or other gas detecting equipment.
2. Carry out a ‘Commissioning’ check of the appliance as shown in the Installation Section of this manual.
3. Ensure that any adjustments done to components that have adjustments / settings that are paint sealed, these are to be
re-sealed.
NOTE: If it is not possible to get the appliance to operate correctly, shut ‘Off’ the gas and power supply and contact supplier
of this appliance.
D
O NOT USE A NAKED FLAME TO CHECK FOR GAS LEAKAGES
.
Warning