Moffat BLUE EVOLUTION G91, Руководство по обслуживанию

Страница: 25 / 46

6
Service Procedures
23
Blue Seal Evolution Series Gas Salamander © Copyright Moffat Ltd. 9 February 2016
Amendment 9
6.2.6a Gas Control Valve
(Up to Ser No.
401964)
6.2.7 Gas Control Valve Magnet
1) Remove the side panel (refer 6.1.2), and remove the knob
from the gas control.
2) Disconnect the thermocouple, pilot supply tube, and main
burner supply tube from the gas control.
3) Undo the nut securing the gas control inlet to the supply
manifold.
4) Extract the gas control, replace and re-assemble in reverse
order.
1) Remove side panel (refer 6.1.1).
2) Unscrew the thermocouple from the rear of the gas control.
3) Remove the rear nut from the gas control.
4) Extract gas magnet.
5) Replace and re-assemble in reverse order.
Figure 6.2.6a
6.2.6b Gas Control Valve
(From Ser No.
401965)
Figure 6.2.4
Figure 6.2.7a
Gas Control Magnet
Rear Nut
1) Remove the side panel (Refer Item 6.1.2), and remove the
knob from the gas control valve.
2) Disconnect the thermocouple, pilot supply tube, and main
burner supply tube from the gas control.
3) Undo the nut securing the gas control inlet to the supply
manifold.
4) Extract the gas control, replace and re-assemble in reverse
order.