8
Connect the Dishwasher (Optional)
3. 连接洗碗机(可选)
4. 固定排水弯管
Fix Drainage Elbow
如果您使用洗碗机,请按上图指示进行连接。如果不连接洗碗机则继续下一步安装。用一个起子插入到
洗碗机塞子圆孔中,按图示方向拉出塞子,只需将洗碗机的软管同处理器的洗碗机接口相连接即可(见
上图)。
If you use a dishwasher, please follow the instructions above to connect. If the dishwasher is not
connected, proceed to the next step of installation. Insert screwdriver into the hole of the dishwasher
stopper, pull out the stopper in the direction shown, and just Connect the dishwasher hose to the
dishwasher port of the processor ( see Figure above).
Dishwasher
interface
洗碗机
接口
将排水弯管接到处理器上(见图 A)拧 紧螺丝。
确认所有的管件已接连牢固。(见图B)
Connect the drain elbow to the processor (see Figure
A) and tighten the screws.
Confirm that all the pipe fittings been connected
firmly.(see FigureB)
A
B
Содержание MEX50MCL
Страница 13: ...13 B A 30 A B...