Moeller S40-AM-TD, Руководство пользователя

Страница: 73 / 85

Error Codes
70
02/02 AWB27-1300-GB
36 54 Data length or offset address incorrect
The addition of the parameters entered at the “tra_variable_length” and
“tra_source_offset” and “tra_destination_offset” function block inputs exceeds
the value entered in the variable declaration for the constants “tra_dfl_max or
“rec_dfl_max” .
Check the parameters and enter a permissible value for “tra_variable_length” or
“tra_source_offset” and “tra_destination_offset”.
The impermissible value 0 has been entered at the “tra_variable_length” function
block input. Enter a permissible value.
If the error message appears when accessing the FLASH memory or the RAM memory
card (service 13, service 16), an impermissible value has been used for the data length
(
⬎
128 bytes).
37 55 Subaddress too large
The parameter entered at the “tra_subaddress” function block input exceeds the
value of the constant “tra_sub_max” set in the variables declaration.
Check the parameter and enter a permissible value for “tra_subaddress”.
38 56 Baud rate parameter error
The parameter entered at the “baudrate”
function block input is not permissible.
From the module manuals (AWBs) select a valid value for the baud rate.
39 57 Character format parameter error
The telecontrol module has been assigned an incorrect character format.
Switch the PLC off and on in order to remove the error.
3A 58 Frame type parameter error
The telecontrol module has been assigned an incorrect frame type parameter.
Switch the PLC off and on in order to remove the error.
3B 59 Signal quality error DCD evaluation
The modem signal quality monitoring has reported an error on the DCD line.
Check your telephone line
3D 61 DSR signal missing
The connected modem is not ready for operation.
Check the functional reliability of the connected modem.
Error code Meaning
hex dec