manualshive.com logo in svg

Moeller PS416-INP-40 SERIES, Аппаратное обеспечение и инженерия, Страница: 17 / 74

Поделиться
Скачать
Moeller PS416-INP-40 SERIES Скачать руководство пользователя страница 17

Engineering

1-10

01/00 AWB27-1239-GB

Interference measures

왘

Power, control and signal cables must be laid as 
far away from each other as possible in order to 
avoid capacitive and inductive coupling. If 
separate cabling is not possible, then those 
cables that are the interference sources must be 
screened without fail.

왘

Avoid long, parallel runs of cables with differing 
power ratings.

You can find further information on this subject in the 
Moeller Manual “Electromagnetic Compatibility of 
Automation Systems (EMC)” (TB27-001-GB) and 
“EMC-Engineering Guidelines for Automation 
Systems PS4/PS416” (AWB27-1287GB).

PS416-OUT-400
PS416-OUT-410

The following engineering guideline must be observed 
in order to conform to the EMC guidelines:

The voltage supply cables must be provided with a 
ferrite ring. It should be installed in the closest 
possible proximity of the card. One or more voltage 
supply cables may be present. The cables may not 
be connected to further devices.

HF-ferrite rings are not supplied with the card.
Place a separate order for type PS416-ZBX-405.

Содержание PS416-INP-40 SERIES











































































Отзывы:

Нет отзывов