Moeller PS416-INP-40 SERIES, Аппаратное обеспечение и инженерия, Страница: 10 / 74

1-3
01/00 AWB27-1239-GB
General
1 About the cards
1
Task The digital input cards detect 24 V DC input signals
from external signal encoders via their 16 inputs and
make them available for further processing to the
central processor of the PLC.
Depending upon the requirements, the
PS416-INP-400 or the PS416-INP-401 can be used.
The basic difference has to do with the on/off delay
(see “Technical Data” on page 4-1).
The digital output cards supply the 24-V-DC for the
actuators. For this, the PS416-OUT-400 features
16 500 mA outputs; the PS416-OUT-410 has 8
2 A outputs.
Hard-/Software
requirements The following hardware and software components
are required when using the digital input and output
cards in a PS416 system.
Table 1-1: Hardware and software requirements
1) For Hardware Configuration of PS416-CPU-223
see AWB27-1243GB.
Sucosoft
for PS416-CPU-223
1)
:
for PS416-CPU-200/-300:
for PS416-CPU-400
Operating system version 1.32 or higher,
S30-S316-D/-GB/-F version 2.31 or higher
Operating system version 2.0 or higher,
S40-D/-GB/-F version 2.0 or higher
Operating system version 1.0 or higher,
S40-D/-GB/-F version 1.0 or higher
Rack PS416-BGT-400/-410/-420 or -421 with potential equalisation bar,
PS416-ZBX-401/-402/-403
Power supply cards PS416-POW-400/-410/-420
CPU PS416-CPU-200/-300/-400, PS416-CPU-223
1)
Programming cable or
interface converter PS416-ZBK-210 (PRG/RS232)
UM1.5 (PRG/RS485)