background image

Device Description MC-HPG-2x0

 

Display PLC 

MC-HPG-2x0

 

 

 

 

Introduction 

 

 I

NTRODUCTION  

 

 
 

Features of the MC-HPG-2x0

 

devices 

 

• 

PC-COMPATIBLE COMPUTER CORE 

• 

STANDARD FIELDBUS INTERFACES  

CANopen, PROFIBUS-DP (Option) 

• 

ETHERNET ONBOARD 

• 

EXCHANGEABLE COMPACTFLASH™ 

• 

PROGRAMMABLE TO IEC61131 (IL, LD, FBD, SFC, ST, CFC) 

• 

INFRARED TOUCH-TECHNOLOGY 

• 

IP65 FRONT 

The MC-HPG-2x0 series display PLC combines in one device a graphical 
operator panel with touch screen and a powerful compact PLC. This future-
oriented device concept offers a wide range of automation and networking 
options.   

 

The PLC is programmed in compliance with the IEC61131 industrial 
standard. The graphical screen masks are designed effectively and simply 
using the visualization tool EPAM and EXCEL. This makes the display PLC 
a universal device for automation applications. 

 

The integration of third-party systems (I/Os, drives etc.) via standard fieldbus 
interfaces (CANopen) and their integration in the overall system offers 
access to a wide range of process optimized peripheral components. 

 

Thanks to the integrated Ethernet interface the MC-HPG-2x0 series display 
PLCs have the capabilities for Web applications. 

 
Application range 
 

The MC-HPG-2x0 series display PLC is designed for controlling, operating 
and monitoring machines and plants. The integrated infra-red touch 
technology ensures fast and simple operation. The rugged and compact 
design allows the implementation of applications that were previously 
impossible due to the space and cost requirements involved. 

 

The high degree of protection (front IP65) and the omission of any moving 
parts (hard disks, fans) makes the devices ideal for robust use in rugged 
industrial environments directly at the machine.   

 

The devices can be installed in control panels or control desks without any 
problem. 
 
 
 
This device description is a reference for the technical data, installation, 
terminals, commissioning, operation, and maintenance of all MC-HPG-2x0 
versions. The illustrations in this document are for the 5.7” device version 
(  Section 3), unless otherwise stated. The designation and function of the 
connections and signals are the same for all versions. 

 
04/05 AWB2776-1574GB 
 

©

 by Moeller GmbH 

9

Содержание MC-HPG-2x0 Series

















































Отзывы: