Moeller MC-HPG-2x0 Series, Описание устройства

Страница: 28 / 48

MC-HPG-2x0 Display PLC
Device Description MC-HPG-2x0
Operation
6.5 S
TARTUP BEHAVIOUR
/
STARTUP
After power on, the user program is loaded from the CompactFlash™ into
the RAM and the PLC is started.
Procedure :
Power on
PLC-
Programm
present
?
Battery
o.k.
?
Reset-cold
Start (PLC.INI)
PLC- Status:
„Run“
PLC- Status:
„Stop“
PLC- Status:
„System Fault“
PLC-Status:
„Power on“
Startup=WARM
(Default)
?
Startup=STOP
?
Hardware-
o.k.
?
No
No
No
No
6.6 P
ROGRAM TRANSFER
If the user program was compiled error-free on the programming device
(PC), it can be loaded into the working memory of the MC-HPG-2x0 and
then started.
PC PLC :
When logging on to the PLC from the PC, the program in the PLC is
compared to the program in the PC. If they are not the same, a prompt will
ask whether the program is to be overwritten. If this prompt is confirmed, the
PLC switches to Stop status and the new program is loaded into the working
memory. (Program transfer/Online Change see also the XSoft manual).
PC PLC and CompactFlash ™:
The user program is saved on the CompactFlash™ by generating a boot
project.
04/05 AWB2776-1574GB
©
by Moeller GmbH
28