10
6.
Main box output connections
6.1
Wago connectors
The main box has two banks of Wago connectors for the 2x 30A and 4x 20A outputs.
The Wago clap technology makes for faster installation and eliminates maintenance. These
connectors all use clamps to terminate fine stranded and solid stranded conductors.
Strip the insulation from the end of the cable to be inserted approximately 14mm.
To open the Wago connector, using a small flat blade screwdriver, push in the release button on the
top of each connector.
Once the wire is inserted into the connector, remove pressure from the screw driver, then test
pull the cable to ensure it is secure.
The Wago clamp secures the conductor and encloses its insulation.
The release buttons are marked in red on this diagram. On the box they are the same color as the
connector.
