18
AIR14-501.2
REPLACEMENT PARTS
REPLACEMENT PARTS
For ease of identification when ordering replacement parts or
contacting the factory about your unit, please quote the unit type
and unit serial number. This information can be found on the
serial plate attached to your unit (see Figure 19.1).
When a component part fails, a replacement part should be
obtained through our Parts Department. If the part is considered
to be under warranty, the following details are required to
process this requirement:
1. Full description of part required, including Unit’s part number,
if known.
2. The original equipment serial number.
3. An appropriate purchase order number.
To order replacement parts contact
technicalservice@
na.modine.com
or call
1-800-828-4328.
Figure 18.1 - Model Nomenclature
1 - Product Type (PT)
Z - Varsity
®
Unit Ventilator
2 - Style (S)
C - Ceiling Mounted
3 - Cooling Control (CC)
V - Valve Control
F - Face and Bypass
4,5,6,7 - Unit Size (US)
750 - 750 CFM
1000 - 1000 CFM
1250 - 1250 CFM
1500 - 1500 CFM
8 - Inlet Air (IA)
M - Bottom Return Air, Rear Outside Air
N - Bottom Return Air, Top Outside Air
P - Rear Return Air, Top Outside Air
Q - Rear Return Air, Bottom Outside Air
R - Bottom Return Air, No Outside Air
S - Top Return Air, No Outside Air
9 - Discharge Air (DA)
E - Front Discharge with Duct Collar
F - Front Disch. with Dbl. Defl. Grille
G - Down Disch. with Dbl. Defl. Grille
10 - Cooling Option (CO)
0 - None
2 - 2-Row Chilled Water/Hot Water 2-Pipe
3 - 3-Row Chilled Water/Hot Water 2-Pipe
4 - 4-Row Chilled Water/Hot Water 2-Pipe
5 - Direct Expansion (DX) Cooling Only
11 - Heating Option (HO)
0 - None
1 - 1-Row Hot Water Coil
2 - 2-Row Hot Water Coil
3 - Steam Coil (1-Row)
12 - Coil Access (CA)
A - Right Hand Coil(s)
B - Left Hand Coil(s)
C - RH Cooling, LH Heating
D - LH Cooling, RH Heating
13 - Coil Positions (CP)
0 - Units with One Coil
1 - Preheat: Pos 1 Heating, Pos 2 Cooling
2 - Reheat: Pos 1 Cooling, Pos 2 Heating
14 - Outside Air Damper Assembly (OA)
A - Standard Damper
C - Insulated Damper
E - No Damper (Recirculating Unit)
15 - Supply Voltage (SV)
A - 115/60/1
C - 230/60/1
B - 208/60/1
H - 277/60/1
16 - Motor Type (MT)
1 - Standard
2 - High Static, EC Motor
17 - Electrical Connection (EC)
A - Left Hand Side
B - Right Hand Side
18 - Control (C)
A - By Others, Field Installed
B - Factory DDC
C - Modine Controls System
D - Factory Installed Free Issue
19 - Case Gauge (CG)
A - Standard (16Ga Ext., 16Ga Int.)
B - Heavy Duty (14Ga Ext., 16Ga Int.)
20 - Filters (FL)
A - 70-75% Arrestance (Standard)
B - MERV 8
1
2
3
4-7
8
9
10
11
12
13
14
15
16
17
18
19
20
PT
S
CC
US
IA
DA
CO
HO
CA
CP
OA
SV
MT
EC
C
CG
FL