FR-D2102
Ultra Germicidal Smart Fan Instructions 5
CAUTION
:
Before assembling your fan, refer to the “Making the Electrical Connections“
section. If you feel you do not have enough wiring knowledge or experience, have your fan
installed by a licensed electrician.
NOTE
:
Before servicing or cleaning the fan, switch power off at the circuit breaker.
When using electrical equipment, basic safety precautions should always be followed including
the following:
WARNING:
This equipment is designed for use with germicidal UV radiation sources and must
be installed in compliance with technical directions to prevent risk of personal injury from UV
radiation.
WARNING:
UV radiation can pose a risk of personal injuries. Direct exposure can result in damage
to eyes and skin. To reduce risk of exposure this equipment must be installed in accordance with
the manufacturer’s installation instructions.
WARNING:
UV and optical radiation can be reflected by surrounding surfaces such as ceilings and
walls. Since the reflective properties of surfaces can vary widely, they should be considered as
part of site planning. For example, UV light may lead to a change in the color of paint that has not
been UV stabilized. Fading or discoloration of materials directly exposed to UV radiation should be
considered normal wear. Black is the least reflective color and white is the most reflective color.
WARNING:
It is the responsibility of the installer to ensure that persons will not be directly
exposed to UV or optical radiation during equipment operation. This will require the installer to
conduct an assessment of irradiance or illuminance levels in the surrounding occupied spaces
prior to occupancy.
WARNING:
Equipment must be mounted in locations and heights where it will not be readily
subjected to tampering by unauthorized personnel.
WARNING:
Maintenance and servicing of this UV product must be performed by authorized
personnel. Service personnel must wear appropriate Personal Protective Equipment (PPE) if the
equipment will be in operation during the maintenance or servicing work. Contact the equipment
manufacturer for PPE recommendations and guidance.
WARNING:
The use of accessory equipment not recommended by the manufacturer may cause an
unsafe condition.
WARNING:
Do not use this equipment for any purpose other than intended use.
WARNING:
Do not install the fan where the top of the UV module can be visible, for example,
beneath a catwalk or breezeway that will permit direct exposure to UV radiation.
UV Safety Rules
