FR-D2102
Ultra Germicidal Smart Fan Instructions
28
Why is my UV light flashing when I first turn it on?
The fan is equiped with a timer that automatically tracks how much
time the UV module has been used. When there are approximately
80 hours remaining in the module’s life, the light will flash when
turned on indicating that you should replace the module to ensure
efficacy. See replacement module instructions for more information.
To preserve the lifespan of the UV module - do not leave the fan and
UV running for extended periods of time. The UV module has an
approximate 6,500 hour lifespan.
What is Pairing?
Pairing is the process of connecting your Modern Forms remote to
your fan. Your fan comes pre-paired to your included remote control.
However, if you want additional controls for your fan or if you’re
replacing a control, refer to the pairing and unpairing section of the
instructions.
What is a Factory Reset?
Factory Reset is a restore of the fans original settings. This can
be achieved from the control or by pressing and holding the small
button on the receiver until you hear three audible beeps or by
holding down the fan toggle, light toggle, and season toggle buttons
on your paired remote for 10 seconds.
NOTE:
You will need to re-pair your remote to the fan following a
factory reset. A factory reset will also disconnect the fan from your
home Wi-Fi network and will require you to add the fan using the
Modern Forms Smart Fans app.
Please refer to the FAQ section of our app for further guidance.
For all other questions, please contact our dedicated Fan Support
specialists. Contact information can be found at the front of the
instructions.
12. Troubleshooting cont.
