FR-D2102
Ultra Germicidal Smart Fan Instructions 25
12. Troubleshooting cont.
My Fan is Noisy
1. Allow for 24-hour break-in period. Most noises associated with a
new fan will go away during this time period.
2. Check to make sure the screws which attached to the blades
(and blade arms when applicable) are tight.
3. Check to make sure all screws in motor housing are snug.
4. Tighten the hanger bracket screws and make sure the outlet box
is secured.
5. Your wire connectors may be rattling against the fan’s canopy.
6. Make sure you have a cUL/UL approved outlet box and it is
installed correctly.
My Fan is Wobbling
1. Tighten the set screws in the downrod.
2. Make sure your hanger ball assembly is locked into place in the
hanger bracket.
3. Tighten the hanger bracket screws to the outlet box.
4. Make sure the fan blades are properly aligned and securely
fastened to the motor housing assembly/blade arms.
5. Make sure the gaps between the blades are evenly distributed or
make sure you are using an approved cUL/UL listed outlet box
and it is installed correctly.
My Fan is not producing Enough Air Movement
If possible, please consider using a longer than included downrod.
