Modena Forte Series, Руководство пользователя

Страница: 7 / 19

7
5. The exhaust hood has two holes on it: Hole D and Hole E (look at
the picture). To install the spigot/flange and hole cover, follow these
instructions:
•
For ducting / exhaust system:
Install the spigot / flange G on one of the air holes, either D or E.
Holes which do not have spigot / flange shall be covered with Hole
Cover H.
•
For recirculation system:
Both air holes D and E shall be covered with the available plastic
Hole Cover.
.
INSTALATION OF EXHAUST HOOD
Exhaust hood can be installed on the concrete (brick) wall or the bottom part of the kitchen set
.
Installing on concrete (brick) wall
1. Draw a centerline on the wall where the exhaust hood is to be
installed (1).
2. Post a template for drilling on the wall (2). If no template is
available,
attach the exhaust hood on the wall and mark the spot on the wall
where a hole is to be made.
3. Create holes on the four marks with a 6 mm diameter drill bit or fisher
size (3), and then insert the fisher to the four holes (4).
Attention:
Before drilling, make sure that there's no cable installation, water pipe and installation inside the wall.