Modena Forte Series, Руководство пользователя

Страница: 8 / 19

8
4. Install the screw on both upper holes and set aside 1 cm between
the head of the screw and the wall surface (5).
5. Install the exhaust hood on the screwed wall by suspending the vent
hood on the screw (6).
6. When the exhaust hood is positioned correctly on the wall, tighten
both screws on the upper part (7).
7. To reinforce the exhaust hood handle on the wall, install the screws
on both holes on the bottom part (8) and tighten them (9).
8. Close the grid
9. Connect the exhaust system with the spigot / flange if the exhaust
hood is to be operated as a ducting / exhaust system.
Installation on the bottom part of the kitchen set
1.
Put the exhaust hood on the bottom part of the kitchen set in
accordance with the planned position.
2.
Mark the bottom part of the kitchen set for flexible pipe hole and then
creates a hole if the exhaust hood is to be operated with ducting /
exhaust system.
3.
Install the exhaust hood with 4 screws on the prepared position.
4.
To reinforce the exhaust hood handle on the kitchen set, install the
screws on other holes on the upper part and tighten them.
5.
Connect the exhaust system with the spigot / flange if the exhaust
hood is to be operated as a ducting / exhaust system.
OPERATING PROCEDURE
MODENA Exhaust Hood has 2 (two) work methods as follows::
DUCTING / EXHAUST System:
•
In this mode, the exhaust hood operates by sucking the smoke /
cooking odor and then discharging it out of the vent.
•
A heat / fire-resistant ducting system is required to discharge smoke
/ odor out of the vent.
•
To connect the exhaust hood with the discharge duct, use
"spigot/flange" is designed with a diameter of 100 or 125 mm.
Several things which require attention in installing the ducting system exhaust hood:
1.
Carbon filter must be removed because the cooking odor will be
sucked and immediately discharged out of the room.
2.
The suction force will be diminished if the exhaust system is too long
and there are too many elbows.
3.
Do not connect the exhaust system with a chimney or an air duct or
hot steam duct.
4.
If the exhaust hood is to be installed in a multi-storied building or an
apartment, consult with the person in charge of the building /
apartment prior to installing the exhaust system.
5.
Exhaust hood with ducting system should be used in an open-air
room with good air circulation.
RECIRCULATING system: