Modena EL 2 W, Руководство пользователя

Страница: 10 / 13

10
ELECTRICITY LEAKAGE PROTECTION
When the electricity leakage testing circuit is working normally and if the current leakage is bigger than
certain value between 7.5mA and 15mA, the
display on EI 2D B will turn off or “Earth” indicator, “ELCB”
and “Power” indicator on EI 2 W will flicker, as well as no heating. The water heater can only be used
after the failure is excluded.
WATER FLOW ADJUSTMENT
Rotate the handle of the water flow (valve) to adjust the water flow.
WATER TEMPERATURE ADJUSTMENT
Rotate the handle of water flow (valve) to adjust the water flow based on necessity. Adjust power by
rotating knob, clockwise rotate, power will be increased and water temperature increase accordingly or
vice versa.
OVERHEATING PROTECTION
If the water flow is weak and the power is highly used during the usage of the appliance, the outlet
water temperature is rather high; the appliance will stop heating automatically. At this time, please
lower the power and adjust the water flow faster in order to avoid inconsistency of water temperature.

This electric instant water heater should be installed at the place without sunshine or rain spray.
Please cut off power supply (electricity flow) if the water heater is not use for a long time.

In order to avoid the blockage of water heater, please rinse the pipe with water for about 10
seconds to drain away the impurities in the pipe before connecting the water source to the water
heater.

If the unit has not been used for a long period of time, check the water heater first before use.
Connect the water heater with power supply after the water flows out stably.

To avoid moisture, do not spray water to the circuit breaker or the heater body directly.

Please cut off the power supply in the weather of thunder and rain to avoid damaging the water
heater.

If the water heater is not use for a long period of time, please cut off water inlet to prolong the
lifespan of the water heater.

Check the power cord that is connected to terminals frequently to make sure that they are in well
condition, firmly connected, no overheating case, and in a well state of grounding .

Disassembly the shower head and sealing ring to clean periodically.
DECLARATION: This water heater can only be maintained by authorized service technician of
MODENA. The incorrect installation and using method may cause serious injury or loss of property.
Problem Possible Cause Recommended Action
When switching on the power,
screen displays
“E5” and
flashing (EI 2D B) or ELCB
indicator light is off (EI 2 W).
1. Power supply error
2. PCB error
3. Electricity leaks. 1. Check whether the power
supply is cut.
2. Contact MODENA Call
Center for repair.
The heating indicator light is 1.
“Power” knob is off
1.
Rotate “Power” knob
Part 6: Troubleshooting
Part 5: Maintenance
Warning! Do cut off power supply before maintenance, to avoid danger like electric shock.